VC / NIC202a
← Infant Radiant Warmer Open Care System Apple SeriesIn catalogue
Infant Radiant Warmer with Fixed Baby Cradle and Drawers with Microprocessor based temperature controller with 4 modes Skin / Air / Manual / Prewarm mode
Standard Specifications for NIC202a Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake. Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³ Continuous head up/down facility X-Ray cassette holder Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material Slots for sensor and ventilator tubing Side tray
Enquire about this product ↗At a glance
Clear specs.
Better decisions.
Use these core specifications as a guide. Contact our team for full technical sheets, options and regional availability.
Feature 1Fixed height warmer with attached baby cradle and drawers mounted on 4" (100mm) wheels, 2 with brake.
Feature 2Stainless steel baby tray with water proof, zipped cover mattress of density approx. 21-25 kg/m³
Feature 3Continuous head up/down facility
Feature 4X-Ray cassette holder
Feature 5Collapsible/lockable Side Supports made up of Unbreakable polycarbonate material
Feature 6Slots for sensor and ventilator tubing
Feature 7Side tray for placement of monitor
Feature 8Stainless steel infusion rod with facility to mount Syringe/infusion pump
Feature 9Lower shelf below baby tray to facilitate under surface phototherapy.
Height74.5" (1890 mm), Width : 28.0" (710 mm), Length : 39.0" (990 mm)
Bed to Floor Height37.5" (950 mm)
Distance between baby bed and heater33" (840 mm)
Mattress size30" (762 mm) x 20" (508 mm)
Height of side panel above baby bed5.75" (145 mm)
Feature 15Microprocessor based temperature controller with Pre-warm, Manual and Skin Servo modes
Feature 16LED Display of Skin Temp.,Air Temp., Set Temp. (Resolution 0.1°C) & Heater Power %.
Feature 17LCD to display modes of operation, Alarm messages, Skin Temperature in °F and Timer.
Feature 18Thermistor based sensor with Accuracy of +/- 0.2°C (Temp. Calibration not require)
Modes of OperationSkin Servo, Air, Manual and Pre-Warm
Feature 20Keypad lock facility
Skin modeTemperature range: 34 to 38°C , Resolution : 0.1°C
Air modeTemperature range: Room temp. to 39°C , Resolution : 0.1°C
Manual modeAdjustable Heater Power 0 to 100% (with an increment of 5%), Time duration:15mins
Pre-warm modeTo pre-warm the cradle before baby is placed on the bed. (No alarm will be activated during Prewarm mode) Adjustable Heater Power 0 to 25% (with an increment of 5%), Time duration:30mins
Overhead heater boxSwivelling, Consists of Ceramic heater (650 Watts) placed in parabolic reflector with a safety grill & Halogen observation light (12V/50W) for observing the baby
Operating Voltage220-240 VAC, 50Hz, Power: 800W (Max.)
AlarmAudio alarm with 10 minute mute facility & Visual alarms with message on LCD as follows
Ready to specify NIC202a?